Watco

WATCO EPOXICOTE HB PRIMER

Epoxy resin primer for preparing bare concrete for painting

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Watco Epoxicote High Build Primer is specially designed for use with Watco Epoxicote High Build. Epoxicote High Build is a high-performance 100% solids epoxy resin coating, which benefits from the use of this primer on bare concrete surfaces. Use the primer on hard, smooth, power-floated concrete which would otherwise reject a paint coating. This eliminates the need for grinding or costly shot blasting. Also use on weaker, porous bare concrete surfaces. If a high-build coating such as Watco Epoxicote High Build is applied to a porous unsealed concrete surface, air can become trapped in the coating during application and cure leading to bubbles in the finished floor. This primer prevents this from happening.Recommended areas of use.Priming any bare concrete surface before applying Watco Epoxicote High BuildKey Features.Primes hard, smooth or power floated concrete ready for painting
Seals porous concrete to prevent air entrapment (bubbles) in new paint coating
One coat application – quick and easy to apply
Low odour, two-part, water-based epoxy resin
Ready for overcoating with Watco Epoxicote High Build after 12 hours at 20°C

Title Category

TDS

Technical Datasheet

Download

SDS Comp A

Safety Datasheet

Download

SDS Comp B

Safety Datasheet

Download