WATCO POWERFLOAT PRIMER

Watco Powerfloat Primer enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating that includes a strong solvent. For more information, please download a product datasheet from the quick links below.Please note: Whilst Powerfloat Primer avoids the use of mechanical preparation, diamond grinding or shot blasting does provide a better finish overall and is recommended. For smaller areas where mechanical abrasion is difficult Powerfloat Primer is a great back-up option.Recommended areas of usePriming power floated, very smooth or non porous concrete floors which are prone to rejecting paint
Clear Powerfloat Primer can be used on clear ceramic tiles before application of Watco Protecta-CoatKey FeaturesPrimes hard, smooth surfaces ready for painting
Eliminates the need for costly shot blasting or grinding
One coat application: quick and easy to apply
Low odour
Superior performance demonstrated by ISO testing to CE Mark EN1504-2
Easily applied by roller

Colour Options: Light Grey/ClearCuring times: The following is based on good ventilation and a floor temperature of 15 -20°CWith all epoxy coatings such as Watco Epoxy Gloss Coat or Safety Coat: Allow the Primer to dry for 16 hours, but no longer than 72 hours before overcoating
With Watco Concrete Floor Paint, Flexicoat and Safety Grip Flex: Allow the Primer to dry for at least 5 days before overcoating
With polyaspartic coatings such as Cold Set Coating or Safety Coat Cold Cure: Allow the primer to dry for at least 16 hours but no longer than 72 hours before overcoating