WATCO POWERFLOAT PRIMER RAPID

Watco Powerfloat Primer Rapid enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating that includes a strong solvent. For more information, please download a product datasheet from the quick links below.Please note: Whilst Powerfloat Primer avoids the use of mechanical preparation, diamond grinding or shot blasting does provide a better finish overall and is recommended. For smaller areas where mechanical abrasion is difficult Powerfloat Primer is a great back-up option.Recommended areas of usePriming power floated, very smooth or non porous concrete floors which are prone to rejecting paint
Clear Powerfloat Primer can be used on clear ceramic tiles before application of Watco Protecta-CoatKey Features

Rapid curing allows same day priming and painting
Primes hard, smooth surfaces ready for painting
Eliminates the need for costly shot blasting or grinding
One coat application: quick and easy to apply
Low odour
Superior performance demonstrated by ISO testing to CE Mark EN1504-2
Easily applied by roller

Colour Options: Light GreyCuring times:With Watco Epoxy Gloss Coat/Safety Coat: Allow the primer to dry for 3 hours at 15-20°C, but no longer than 36 hours, before overcoating.
However, with Watco Concrete Floor Paint/Flexicoat and Flexigrip: Allow the primer to dry for at least 5 days before overcoating.
Watco Polyaspartic Coatings: Allow the primer to dry for at least 3 hours at 15-20°C but no longer than 36 hours before overcoating.